The Importance of Applying a Ceramic Coating to Your Vehicle’s Paint Correction

Your car’s paint has aged and looks older than it did when you bought it. As you drive, the paint on your car is exposed to the sun, dirt, dust, rain, and other contaminants such as brake dust, bird droppings, and water spots.

Purchasing a brand-new car is prohibitively expensive, especially if your current vehicle is in good working order. What if there was a way to restore it to its original state? There is, however, a way.

What is Paint Correction?

A car paint correction process will save you the expense of getting a new vehicle. If you still want a brand-new car, a paint correction job will enable you to achieve a higher resale value. Paint correction is the process of removing defects such as scratches and swirls from your paint.

Causes of Paint Defects

Spider web or Swirl marks

Most automobile surfaces scrape. Whether from washing and drying, using an old towel, or neglecting to wax a car for an extended period of time, these scratches can quickly become spider web-like swirl marks. These changes in the paint surface occur when dirt particles become embedded in the paint, creating a soft haze effect on the entire panel. Paint-correcting technicians can use high-grade polishes and buffing techniques to remove the swirl marks or spider webbing, restoring the glossy shine of your car.

Micro marring

Most car surfaces develop these scratches. Often caused by rubbing against other surfaces or by improper cleaning and drying methods, these micro-marring scratches are often barely visible. Paint-correcting technicians can use polishes to remove slight imperfections, bringing your car back to showroom shine.

Birds dropping

Bird droppings that have been left on the car for an extended period of time etch the paint. The combination of acidity and protein will cause severe paint defects on the surface of your paint. Light etchings are removed by machine polishing.

Faded Paint and Paint Oxidation

These flaws appear in the clear coat or base coat. Long-term exposure to environmental contaminants and UV rays will cause paint oxidation and faded paint. When you neglect your car’s paint, it will oxidize and fade. This element causes the paint on the vehicle to appear dull.

Clear Coat Failure

A clear coat is a below-surface defect. Oxidation, UV rays, and other defects destroy the paint. The protective layer and the base coat color start to wear down after a clear coat. At first, only dull patches are visible on the car’s surface, and then the paint cracks and flakes.

How does paint correction remove these defects? The only way to fix a clear coat is to paint the affected areas.

Water spots

There are three types of water spots. They include:

Light water spots

Evaporated water leaves mineral deposits on the surfaces of automobiles. Hard water contains a high concentration of minerals. When hard water is used to wash a dirty car, the contaminants trap the dirt, resulting in light water spots. A simple car wash will often solve this problem.

Medium and severe water spots

Medium water spots penetrate beneath the clear coat, causing surface flaws. Machine polishing will remove all medium water spots. The base coat is damaged by these water spots. This flaw occurs when multiple water spots are stacked on top of each other.

Random Isolated Scratches

Light scratches, micro scratches, and deeper scratches can all be caused by a variety of things ranging from an unexpected encounter with a shopping cart to a loose stone kicked up on the freeway. Fine scratches are some of the most common and most easily fixed. Paint correcting technicians can use a buffing technique that gently rubs away the top layer of paint, exposing undamaged paint underneath while leaving behind a smooth, consistent finish on the vehicle surface. However, for deeper scratches, a technician may not be able to fix the problem fully and may recommend repairing the scratch with a touch-up paint kit or a professional repainting job.

The paint Correction Process

The paint correction process has multiple stages. The stages involved include cutting compounds, wet sanding, and even polishing. The paint job will depend on the paint’s condition. The depth of the defects will determine the paintwork on your vehicle. Here are the steps involved in paint correction work:

Wet Sanding

Wet sanding removes heavily damaged paint. This process removes light to deeper scratches and defects from your car’s paint. Wet sanding can either be done by hand or by machine. A softer block removes scratches, while a rough block evens the paint peel.

Compound cutting

A compound liquid contains abrasive polishing chemicals. To remove the paint, the liquid is combined with a machine. Detailers almost always use a dual-action polish while compounding. After wet sanding, compound cutting is used to remove the swirl marks left by the process.

Finishing polish

Wet sanding and compounding are more aggressive processes than finishing polish. A finishing polish is used to improve the paint correction process. Detailers use a gentler liquid and pad. This polish is the final step in the paint correction process. It restores the paint on your vehicle.

Protection

The paint is never left bare after a paint correction process. Following the paint correction process, a protective coating is applied. Ceramic coatings and wax are examples. Wax is applied by hand or with a machine.

What is Ceramic Coating?

A ceramic coating is a permanent or semi-permanent coating applied to your exterior surface to prevent paint damage. A ceramic coating will offer maximum protection to your car’s paint for years.

What is the Importance of a Ceramic Coating?

A ceramic coating gives your car more than just a glossy, brand-new look. What are the benefits of ceramic coating?

Extra Protection to Your Vehicle’s Layer

Sun rays can cause the paint on your vehicle to fade over the years. A ceramic coating will protect cars from UV rays. Ceramic coatings also offer protection by repelling water and other contaminants.

Ceramic coatings repel dirt

A ceramic coating will provide maximum protection for your car’s paint, especially when driving on gravel roads. It keeps your car clean for the majority of the journey. Afterward, a thorough car wash is not always required to clean the exterior.

The easier time during a wash

A ceramic coating on the car’s surface repels dirt. You’ll have an easy time cleaning it if you’re doing the laundry.

Increases the durability of your vehicles

A ceramic coating extends the life of your paint job. Once applied, your vehicle is less susceptible to many types of environmental hazards that can cause damage to your paintwork. A ceramic coat will protect the exterior of your vehicle for many years.

Are you in need of Ceramic Coating for Added Protection?

If you reside in Frisco, Texas, The Detail Lab professionals can meet your needs. We offer ceramic coating and paint correction services to our clients. Our detailers will ensure your vehicle has a brand-new look. Call us at (781) 733-8245 to schedule an appointment with us today.